Resources › Marine radio

What Are the HF Marine Radio Distress and Calling Frequencies?

In Australia, the MF/HF distress frequencies are 2182, 4125, 6215, 8291, 12290 and 16420 kHz, and the calling frequencies are 2182, 12359 and 16537 kHz. Marine HF uses upper sideband only. The distress frequencies no longer have a continuous voice watch, so send a DSC distress alert first, then make your voice distress call on the associated frequency.

What Are the HF Marine Radio Distress and Calling Frequencies?

Video, 4:21. Captions are available in the player.

In this lesson

In this lesson I explain the HF bands from 2 to 30 MHz, why marine HF uses single sideband, and the calling and distress frequencies you need to know for the LROCP exam.

Read the transcript

Like everything with HF, the frequencies and channels are a bit more complicated than they are for VHF, although many of the principles are the same. To begin with, in HF we talk about bands: 2 megahertz, 4 megahertz, 6 megahertz and so on. Starting at 2 megahertz, the bands run up to 30 megahertz, although in practice most long-haul communications take place in the bands between 4 and 18 megahertz.

Marine operators refer to these bands according to their frequencies. We talk about 4 meg and 6 meg and so on. But amateur radio enthusiasts, or hams, refer to them in terms of their wavelength, so they'll talk about a number of metres. Within each band are the frequencies, which you'll see on the screen of your transceiver. Only the frequencies on the 4 megahertz band and above have channel numbers allocated to them, and they're all duplex.

You can program your own channels into your unit. However, one feature of HF that you need to know about is that transmissions are single sideband, and for each frequency you can select upper or lower sideband. Now, like a lot of things, you don't necessarily have to understand the theory to operate your unit, but it does help. Radio signals have two parts. A carrier wave, which is transmitted at the frequency that's set but contains no information, and the information, which comes from changing the amplitude of the signal.

This method produces sidebands on either side of the carrier frequency. However, since the entire message is coded in each sideband, the carrier and one of the sidebands can be removed, so that more power can be applied and less bandwidth used up. This means that for any frequency you have both an upper and a lower sideband. But, and this you need to know, marine communication equipment only uses upper sideband.

In Australia, the main frequencies for establishing communications, the calling frequencies, are 2182, 12359 and 16537 kilohertz. For VHF, we simply have the same distress channel, which is also used for calling, channel 16, and its auxiliary, 67. But for HF, they're different. HF also needs emergency frequencies across several bands, because not all bands will be usable at any particular time.

In Australia, the distress frequencies are 2182, 4125, 6215, 8291, 12290 and 16420 in the MF/HF marine bands. And notice they've all got a two in them. That'll help you in the exam. There's no longer a continuous watch on each of those frequencies, so you need to use DSC to raise the alarm. Having sent the DSC alert, make your distress call on the associated frequency, because having been alerted through DSC, they'll be ready to have the alert confirmed and the details provided on that frequency.

This lesson comes from our VHF and MF/HF marine radio courses at Marine Radio Online, which prepare you for the SROCP and LROCP marine radio operator exams.