Resources › Coastal navigation

What Is a Nautical Mile, and How Do Latitude and Longitude Work?

A nautical mile is one minute of latitude, exactly 1,852 metres. There are 60 minutes in a degree, so a degree of latitude is 60 nautical miles, and the latitude scale on the side of every chart becomes your distance ruler. Always measure distance on the latitude scale, never the longitude scale, because meridians close together towards the poles. A knot is one nautical mile per hour.

What Is a Nautical Mile, and How Do Latitude and Longitude Work?

Video, 16:14. Captions are available in the player.

Correction: in the summary at 15:32 Tim says "longitude scale". Distance is always measured on the latitude scale, as explained at 7:04.

In this lesson

In this lesson I explain latitude and longitude as a grid, how precise a position is as you add minutes and decimals, how to plot a position on the chart, how to measure distance with dividers, and how to work time, speed and distance problems, including converting decimal hours to minutes.

Read the transcript

Working out where you are and how to get to where you want to be has been the sailor's challenge for centuries. Sailors once managed it with nothing more than a sextant, rough charts, and dead reckoning, a reminder of just how remarkable modern navigation tools really are. Today, of course, we've got GPS that tells you exactly where you are instantly. But here's the thing. Batteries go flat, screens break, satellites get blocked, and sometimes you just want to understand what's going on, the theory behind the screen.

So in this first module, we'll start right at the foundations of navigation. By the end, you'll be able to look at a chart, plot a position using latitude and longitude, and measure distances in nautical miles. This is the first step to thinking like a navigator. Do you remember the old street directories? Each page had a grid, letters across the top, numbers down the side.

You'd look up Smith street in the index, and it would tell you something like 72 G2. A grid is just an artificial construction placed over a map so that you can easily reference locations. Charts do something similar, but instead of an arbitrary grid, they use a global system, latitude and longitude, to reference locations. Latitude are the horizontal lines running east west. They're also called parallels because they run parallel to each other, never meeting.

The equator is zero. Move north and you're in degrees north. Move south and you're in degrees south. Each degree of latitude is subdivided into 60 minutes, and each minute into decimals of a minute. That means we can provide coordinates that plot our position to within a few metres or even less.

Let me explain how precision increases as we add detail. If I say a position is at 40 degrees south, that places it somewhere within about 100 kilometres. But if I say 40 degrees 30 minutes south, I've narrowed it down to about two kilometres. And I give… If I give you a decimal, 40 degrees 30.5 minutes south, I'm pinpointing you to within about 200 metres, four decimal places, and we have our location to within 20 centimetres.

For most coastal navigation positions, accuracy to one decimal place, that's about 185 metres, is perfectly adequate. Longitude are the vertical lines running north south, which meet at the poles. They're called meridians. Unlike with latitude, there's no obvious zero point for longitude. The prime meridian, which runs through Greenwich, England, was agreed late in the nineteenth century as the universal reference point, 0 degree longitude.

From Greenwich, longitude extends east to 180 degrees east and west to 180 degrees west. Australia is in the Eastern Hemisphere, Sydney at about 151 degrees east, and Perth about 116 degrees east. How can we go to a spot where no land exists on any map? This chronometer keeps the exact time in London. I'm using it to make an altitude measurement to determine longitude.

Only then will we find our exact spot at sea. When we combine latitude and longitude, we can specify any particular position on Earth precisely and unambiguously. When we describe a position, we always give latitude first, then longitude. And, of course, we need to indicate whether the latitude is north or south, and whether the longitude is east or west. For example, Melbourne is at 37 degrees 49 minutes south and 144 degrees 58 minutes east.

Let me show you how to find an object on our hypothetical Bay chart that's at this position, 28 degrees 3.6 minutes south, 161 degrees 56.3 degrees east. First, find 24 degrees south on the latitude scale on the left edge, then count the minutes, one, two, three, then decimals of a minute. On this chart, they're in units of 0.2, so two, four, six. Then draw a light horizontal line at this latitude, ensuring that it's parallel. Now find 161 on the longitude scale at the top.

We see 162 degrees here, and so anything to the left is 161 degrees. Then the minutes, 56 is here, and decimals, halfway between 0.2 and 0.4 is 0.3. We draw a light vertical line from this point, again, ensuring that it is perfectly parallel to our longitude lines. Where these lines cross is our location, which is Trent's light. In a moment, I'll get you to pause the video and complete a short exercise, which will appear on the screen.

To complete this exercise, you'll need to have printed out the hypothetical Bay chart, and you'll also need a ruler or plotter and a pencil. Here's a fun fact that's absolutely fundamental to navigation. One minute of latitude equals one nautical mile. As we know, there are 60 minutes of latitude in a degree, so a degree of latitude is 60 nautical miles. This relationship gives navigators a built in measuring tool on every chart.

The latitude scale becomes your distance ruler. Unlike latitude lines, which stay the same distance apart everywhere, longitude lines meet at the north and south poles. This means that the physical distance between the two meridians changes. At the equator, one degree of longitude represents about 60 nautical miles, the same as latitude. But at 60 degrees latitude, one degree of longitude represents only 30 nautical miles, exactly half.

And of course, at the poles, all the meridians meet at a single point representing 0 miles. So that's why we never use longitude to measure distances. Only latitude gives us a constant reliable measure. Always use the latitude scale on the side of the chart to measure distance, never the longitude scale across the top or bottom. A nautical mile is exactly 1,852 metres.

For comparison, a statute or land mile is 1,609 metres. A knot is simply one nautical mile per hour. If your boat travels at 5 knots, that means it will cover 5 nautical miles in an hour. Knots and nautical miles are the basic vocabulary of the navigator. We never talk in terms of kilometres or kilometres an hour.

To measure distance on a chart, we use an instrument called dividers. They look like a drawing compass, but with two sharp points. They're designed to be used with one hand, squeezing the top to open them and the bottom to close. To use dividers to measure distance, open the dividers and place the two points on the positions you want to measure. Lift the dividers carefully without changing the span and move them to the latitude scale on the side of the chart, left or right edge, doesn't matter which.

Place one point on a convenient graduation, say a whole degree line, and read where the other point falls. Count the minutes between the two points, each minute equalling one nautical mile. Also, a little tip, you need to have the right amount of friction on the divider arms. Too loose and they'll move when you transfer them. Too tight and they're hard to move, especially small distances.

Use the screw at the top to find the right level of friction. For longer distances, more than your dividers can span, you use what's called the walking technique. Set your dividers to a convenient span, let's say, 5 nautical miles measured on the latitude scale. Place one point at your starting position, swing the other point forward along your track, and continue to walk the dividers like a pair of legs counting each step. Then measure any remaining short bit at the end.

To calculate, just take your number of steps, and in this case, we'll multiply it by five and add the remainder. So I've walked two steps of 5 miles plus 2.4 miles at the end. So that's 10 plus 2.4 is 12.4 nautical miles. In a moment, when pause comes up on the screen, you'll pause the video and try this for yourself on the hypothetical Bay chart, measuring the distance from the Fairway Beacon to Trent's light. You can follow the steps on the screen while you're paused and see if you get the correct answer.

Time, speed, and distance. These three variables are connected by a simple relationship that you'll use constantly in navigation. Distance equals speed times time. And from this, we can rearrange to get time equals distance divided by speed, and speed is distance divided by time. Then rate of speed equals distance over time.

Solve for r. We'll practice these shortly. But first, one of the challenges is converting between hours and minutes. That is if you get the result 2.4 hours, what is 0.4 of an hour in minutes? What you need to do is multiply decimal hours by 60 to get minutes.

So in this example, 2.4 hours is 2 hours plus 0.4 times 60, which is 2 hours and 24 minutes. Let me walk through three examples. First, how long does it take to cover 8.4 nautical miles if I'm travelling at 5 knots? Well, we want time, which equals distance divided by speed. So our time will be 8.4 divided by five, which is 1.68 hours.

To convert 0.68 hours to minutes, we simply multiply 0.68 by 40, which gives us a result of one hour and rounding it up 41 minutes. Second, what speed is needed to cover 24 nautical miles in 4 hours? Well, speed is distance divided by time, so our speed will be 24 divided by four, give us an answer of 6 knots. And thirdly, how far can I travel when I'm doing 7 knots for two and a half hours? Well, distance is speed times time.

So our distance is seven multiplied by 2.5. That gives us 17.5 nautical miles. Okay. Now it's your turn when pause comes up on the screen. Pause the video and try the three questions.

Well, congratulations. You've just completed your first real navigation lesson. You now know how to read latitude and longitude from a chart and plot a position using coordinates. You understand why we use latitude for distance measurements and not longitude, and you can measure distance in nautical miles using dividers, both the basic technique and using the walking method. You've also learnt how to convert speed in knots to distance and time, and you can calculate passage times, work out what speed you need to maintain, and figure out how far you've travelled.

Well, these are the fundamental building blocks for everything else we'll do in this course. Get these right and everything else becomes easier. For that reason, it's important that before you move on to module two, you take the time to complete the practice exercises in your workbook and let it sink in, particularly if it's been ages since you've done this kind of maths. Make sure you're confident plotting positions accurately, measuring distances using dividers in the longitude scale, and particularly working through time, speed, and distance problems. If you can do these things without having to think too hard about it, then you're ready to move on.

And in module two, we'll dive deeper into reading the chart itself, understanding its symbols, different types of projections, chart datum, and how to interpret all the information charts contain. There's a lot more on those charts than just coastlines and water. See you in the next module.

This lesson comes from the Australian Coastal Navigation Course, based on The Australian Coastal Navigation Handbook, and supports our practical coastal skipper courses.